Trailers

Tri Axle Tag Trailer:

  • Trailer to have 6.800m of deck and 800mm Beavertail.
  • Gunnel rails on side to have vertical tie points along side approx. 600mm apart.
  • 20” Rims and tyres with spring suspension.
  • Floor to 5mm checkerplate.
  • Ramps to be heavy-duty, hydraulically operated by control at rear of trailer and powered by truck hydraulics or power pac.
  • Hitch to be flying saucer type.
  • All lights to be LED type.
  • Wind-down front leg to be semi-type.
  • Toolbox fitted under deck to be 1000mm long.
  • Finish: to be sandblasted & painted 2-pac paint (white).

Please Note: Inspection and weight ticket paper work provided. Registration at owner’s expense.

Three-Axle Trailer – 48 tonne Spec:

  • Trailer to be 48 tonne spec, three-axle dog trailer.
  • Trailer body to be approx. 5.900m x 2.300m.
  • Sides to be 4mm Hardox HT plate 1100mm high.
  • Floor to be 6mm Hardox HT plate.
  • Two-way tailgate 1200mm high.
  • Well type hoist.
  • Allow rims fitted, outers polished, and inners machine finished, with new tyres.
  • LED lights on front and rear of trailer.
  • Tie points on side of body approx. 200mm above floor.
  • Finish: to be sandblasted & painted 2-pac paint (white), Chassis painted 2-pac paint (black).

Please Note: Inspection and weight ticket paper work provided. Registration at owner’s expense.

8-9 tonne GTM Trailer.

  • Trailer to be single dual wheel type axle.
  • Spring type suspension with under slung springs to lower overall deck height.
  • Trailer floor to be 5mm checkerplate.
  • Gunnel rails to have vertical tie points welded in flanges.
  • Heavy-duty drawbar with oversize semi-type wind down leg in centre so machine can be on or off to wind up.
  • Toolbox under deck approx. 1.000mm long.
  • LED lights fitted on trailer.
  • Rear ramps to be of angle and channel materials with springs to assist in lifting.
  • Large Pintal ring fitted drawbar.
  • Full air brakes fitted.
  • Deck to be approx 6.000m long and rear beavertail section 1.200m overall.
  • Drawbar to be 1.500m long.
  • Trailer to have front rails for buckets to be tied onto.
  • Trailer to be sandblasted and painted 2-pac type paints (white).

Please Note: Inspection and weight ticket paper work provided. Registration at owner’s expense.

12 tonne GTM Trailer.

  • Trailer to be single dual wheel type axle.
  • Tare weight approx. 3 600kg.
  • Air bag suspension with lowering switch mounted on rear trailer.
  • Trailer floor to be 5mm checkerplate.
  • Gunnel rails to have vertical tie points welded in flanges – 500mm apart.
  • Heavy-duty drawbar with oversize semi-type wind down leg in centre so machine can be on or off to wind up.
  • LED lights fitted on trailer.
  • Plastic water tank with soap dispenser.
  • Two 600mm x 400,, x 500mm toolbox under floor, one each side.
  • Front steps both sides at front.
  • Rear swing down legs fitted.
  • Rear ramps to be of angle and channel materials, powered by electric power pac.
  • Large Bartlett ball fitted drawbar.
  • Spare wheel mounted under left side.
  • Full air brakes fitted.
  • Deck to be approx 6.000m long and rear beavertail section 1.500m overall.
  • Drawbar to be 1.500m long.
  • Trailer to have front rails for buckets to be tied onto.
  • Finish: to be sandblasted & painted 2-pac paint (white).

Please Note: Inspection and weight ticket paper work provided. Registration at owner’s expense.

4.500m Plant Trailer – rated 4.500kg ATM.

  • Deck to be approx. 4.500m long.
  • Overall width across mudguards will be 2.500m, 1.900m internal.
  • Floor to be expanded mesh.
  • Axles to have electric brakes.
  • LED lights fitted all round.
  • Landcruiser type rims with new tyres.
  • Pintal type front coupling on front of heavy-duty drawbar.
  • Manual wind-down front leg.
  • Trailer to be sandblasted and painted 2-pac (white) paints.

Please Note: Inspection and weight ticket paper work provided. Registration at owner’s expense.